A high volume all-rounder that strikes a balance between manoeuvrability and wave catching power

£279.99 £349.99 You Save £70.00


Currently Out of Stock

We can send you an email when this is back in stock. Just put your email address in below and you'll know as soon as it's in.



my first "short" - already got me turning!”

mads knudsen, 16 May. Review is from 7S COG (PE) 2013. Translate.
Read More Reviews

The COG is a versatile, high volume board suited to anyone looking for added paddle power and forgiveness, without sacrificing the manoeuvrability of a performance based model.

The template features a full nose, thumb tail, and a continuous curved outline that promotes flow and smooth transitions between turns. Full rails add stability and makes the board sit higher in the water, producing faster start-up acceleration.

The rocker and bottom contours on the Cog vary from most other boards. A deep single concave through the middle flows into a double concave out the tail. This flattens out the rocker and rail line through the back of the board allowing you to maintain speed down the line and in flatter waves. At the same time the double concave keeps that sensitivity under your back foot in steeper waves.

Our new PE construction combines a polyurethane core with epoxy resin. This technology not only looks whiter than other PU boards, it creates a lively feel under your feet and produces better memory to the overall flex.

If you want a high volume all-rounder that strikes a balance between manoeuvrability, wave catching power, and that also has the flexibility of a tri-quad option then the Cog should be your next board.

Dimensions & Fin set-up:

Length Width Thickness Volume/litres Fins
5ft3 19 1/4" 2 1/4" 24.3 FCS - M3 Thruster
5ft6 19 3/4" 2 3/8" 28 FCS - M3 Thruster
5ft9 20 1/4" 2 1/2" 31.4 FCS - M5 Thruster
6ft0 20 1/2" 2 1/2" 33.4 FCS - M5 Thruster
6ft3 20 3/4" 2 5/8" 36.6 FCS - M5 Thruster
6ft6 21" 2 3/4" 40.3 FCS - M5 Thruster
6ft9 21 1/4" 2 7/8" 45 FCS - M5 Thruster

Construction:

POLYURETHANE/EPOXY TECHNOLOGY
PE construction combines a polyurethane foam core with high-grade timber stringer, which is laminated by hand using fibreglass cloth and an exclusive epoxy resin. Epoxy resin is used in PE construction for two important reasons. One, to reduce the rate of yellowing and discolouration of the board and two, our exclusive epoxy is more flexible than polyester and maintains the lively flex pattern typically associated with a new board.
All PE boards are CNC milled from the shapers files and laminated by hand. These boards are light, have incredible acceleration and speed, and feel remarkably sensitive under your feet.

  • Hi everyone Do you send boards to good old germany? The 7S COG in 5´6 for example? Thanks Oli

    Yes, we ship boards to Germany, postage costs are £45

  • Hi I emailed a while ago to ask when the 6'6" cog would be back in and you said mid march, any word on them coming in? Cheers Rob

    Hi, it is looking like the middle or end of April at the moment.

  • Hi MSW can you tell me what the dimensions are of the 6 ft 3' 7s cog ? Width and thickness ? Cheers sj

    6'3" x 20 3/4'' x 2 5/8" Vol. 36.6 ltr

  • Hey I'm interested in the board, but what is the difference between a PU and a PE board? Is a PE classed as epoxy or fiberglass? And what's the pros and cons? Cheers!

    The differences between the constructions is listed below

    Polyester (PU) -
    Polyester or PU construction uses traditional materials and laminating techniques to produce a strong, reliable surfboard with high quality finishes. All polyester boards are CNC milled from the shapers files and laminated by hand using quality components such as Hexcel fiberglass, Silmar resin and Bennett foam. For years traditional polyester boards have been at the forefront of performance surfing. These boards feature a progressive flex pattern controlled by a high-grade timber stringer and feel very reliable under your feet. Polyester construction will perform in all surf conditions and can be adapted to suit a wide variety of surfboard models.

    PE -
    PE construction combines a polyurethane foam core with high-grade timber stringer, which is laminated by hand using fiberglass cloth and an exclusive epoxy resin. Epoxy resin is used in PE construction for two important reasons. One, to reduce the rate of yellowing and discoloration of the board and two, our exclusive epoxy is more flexible than polyester and maintains the lively flex pattern typically associated with a new board. All PE boards are CNC milled from the shapers files and laminated by hand. These boards are light, have incredible acceleration and speed, and feel remarkably sensitive under your feet.

  • Hi, are fins included with this board?

    Yes, a thruster set of FCS M5 fins are included with the board.

  • Hi - when will you be getting a 6'6" 7S Cog in stock please ??? Thanks

    Around the middle of March.

  • my first "short" - already got me turning!

    , 16 May 13. Review is for 7S COG (PE) 2013.
  • This board, while it is of excellent speed and turning capabilities feels like it has much less volume then advertised. Buy a bigger size then you would think. I bought a 5'9" and should have bought a 6'3". Beware of the PE version as it is fragile.

    , 12 Dec 13. Review is for 7S COG (PE) 2013.

Average rating of 3 from 4 ratings.

All reviews are from customers who have bought this product from Magicseaweed. We show the average rating for all reviews but only display here reviews left with a comment. We show all reviews positive and negative, although do bear in mind customers less than completely happy with their order will have had the opportunity of a refund or replacement on all products up to 28 days after receiving an order and submitting a review.

”The headphones I ordered came in excellent condition and in a time-efficient manner, thank you magicseaweed :)“

Aisha

”V pleased with the products and with the speed they were dispatched. Excellent service“

Julie Stevenson