Surftech's Professional Epoxy Ding Repair
Kit includes:
- A 2 grit sanding pad
- A measuring cup
- Part A epoxy
- Part B epoxy
- Fiberglass
- Mixing stick
Pro Epoxy Ding Repair:
1. Prepare the ding by removing any debris or jagged fiberglass
2. Sand down the ding and surrounding area
3. Use Tuflite Ding Dough to fill hole and bring ding back to it's original shape.
4. When dry, sand to even the repair area out if necessary
5. Cut fiberglass cloth slightly bigger than the ding. You can use two pieces of fiberglass for areas that need extra strength. Be sure to cover area about - around the ding. Tape off area if necessary.
6. Mix Epoxy resin 2 parts of "Part A" to 1 part of "Part B" in 2 oz cup provided. Mix thoroughly. Avoid stirring too quick to prevent air bubbles. Mix for roughly 1 minute.
7. Apply a thin layer of resin to the repair then add the 1st piece of fiberglass. Slowly saturate the cloth until it becomes clear then add the next layer if necessary. Again, make sure to slowly saturate fiberglass cloth.
8. Let dry. Should be completely dry in about 2 to 4 hours under normal weather conditions. Set up & cure time may vary due to weather and accuracy of mixing.
9. Once completely dry, use the sanding pad provided with the 2 grits of sand paper. Use the rough grit to remove any bumps and to shape the repair. Use the fine grit to blend the repair surface to the rest of the board. You can apply another "hot coat" of epoxy resin to conceal the texture of the fiberglass cloth if necessary.
Paint using Tuflite Touch Up or Spray Paint. Be sure to shake can thoroughly.
All reviews are from customers who have bought this product from Magicseaweed. We show the average rating for all reviews but only display here reviews left with a comment. We show all reviews positive and negative, although do bear in mind customers less than completely happy with their order will have had the opportunity of a refund or replacement on all products up to 28 days after receiving an order and submitting a review.
