Add To Cart
For UK delivery Tomorrow order this item in the next 17 hours 20 minutes.
What's supplied in the package:
Ideal if you'd like to put FCS plugs in your board or if you need to repair your board.
The Quik Set guides can be stuck to the board to guide in cutting the hole for the plugs and then as a barrier to stop the resin spreading onto the bottom of the board when setting the plugs in place.
About FCS X-2 PlugsSTRENGTH
FCS X-2 has proven to be the lightest post-glass fin system available on the market. Minimising the installed weight of the system ensures the natural balance of the board is never compromised.
FCS fins are secured in place by screws pushing against the two fin tabs at the base of the fin. This maintains a very rigid feel at the base of the fin and allows the direct transfer of power into your turns.
FCS X-2 plugs have the smallest individual footprint of any other fin system allowing the tail of the board to flex naturally. Tail flex is very important because it not only gives the board a livelier more responsive feel, but it also helps create speed and makes the board more forgiving by adjusting to the curve of the wave and the arc of your turns.
Shapers spend considerable time on fin placement so we feel it's very important to see the shapers dots as they tell you at a glance that the system has been installed accurately. We know that a slight variation in fin placement can make a big difference to how your board performs. While other box systems require the removal of the shapers dots, FCS X-2 does not.
FCS X-2 has 4 degrees of cant angle built into the rail plugs making it easy to set the desired fin position while adjusting to both extreme and subtle bottom contours during installation. This allows for a stronger installation with accurate fin cant angles every time.
The small footprint of the FCS X-2 plug allows it to fit easily into boards with channel bottoms, bonzer concaves and other dramatic bottom contours.